Hi everyone. I have a hblink problem. It was working perfectly as a link between hotspots. Suddenly stopped. I have two pi-star hotspots that I'm "burning in" before deploying as a kinds "private line

Many users logging into the CQ-UK network either by C4FM or DMR+ has great audio. CQ-UK is not connected to Brandmeister. Nice audio via AllStar as well. I thought it was time for me to play around co

Hello, I am looking for a guide to get a DSTAR-HAMVOIP (Allstar) Bridge up and running. I have available a Raspberry PI 4 with the HAMVOIP image already installed and configured. I believe the vocoder

How to setup YSF VW Mode in DVSitch to use rooms for the VW Mode (instead the standard DN Mode) BR. Stefan DL1ESZ

What is the best way to upgrade or reinstall over an older working version of DVSwitch without interrupting or losing the existing configuration. Rick n9umj

Hello. I have a P25 to DMR bridge set up, and connected to a reflector and BM talkgroup. Most traffic passes, except for a few that are using an odd 1 or 2 digit user ID on P25. Is there a way to fix

What is the best way to auto start during boot for Analog_Reflector on a Raspberry pi server? -- Chris Viningre Website: ws5b.com Email: chris@...

Gents I have always said if you want to know ask an expert! I am the keeper of a DR2 X based Wires x connected repeater, It has great coverage up and down a major road so we would rather not use it bu

Hello everyone, I would like to set one of my hotspots to RX only. I have a slight null on my repeater system to the southeast about 15 miles out how ever the TX of the repeater is very good and using

Hello, I can successfully connect the DVSwitch app on my android phone to my Allstarlink node. However, when it connects, the voice says "Node 1998". Is this normal? In the extensions.conf and iax.con

With the increase of HamVoIP questions and answers since I created the installer for HamVoIP, I have decided to create a subgroup. <https://dvswitch.groups.io/g/HamVoiP> Please as HamVoIP specific que

Hi I had allstar node 50281 running fine without dvswitch attached. I shut down node 50281 …so I would not corrupt the sd card…and replaced sd card with another sd card with node 50281 configured and

Hello, I have a MicroHub with a RPi2 and internal Baofeng Radio which is hardwired to the RPi2, I can access the RPi on Allstar (no other modes available) using an RF radio which works well, but that'

Has anyone ever constructed a simplex repeater? Something like a "parrot" but actually connected to a radio? I'm not looking to connect to any network. Just a free standing node that grabs the voice p

Hi Steve, I don't know what happened but today when I opened the Monit dashboard I noticed that the YSFGateway process "does not exist". However I don't seem to have any noticeable anomalies and under

Hello: I'm probably off-base here, but hopefully someone can point me in the right direction... I have an Icom D-Star DV repeater (eg, ID-RP4000V and ID-RP2C). The gateway software (which apparently r

I'm experimenting with a Pi W2 running it on hamvoip and bridging it to DSTAR with DVSwitch. The bridging is working well but the ASL has packet loss. I'm thinking of overclocking if it's possible. Op

Hi strange thing on aktuell DVSwitch Sewrver on Raspberry pi Installation manually in new "Bullseye" version of Raspberry. All worked well since weeks. But if i change the TX TLV value from " *0 Menue

When I connect to a DSTAR reflector I get the connect and can receive everyone. As soon as I transmit It transmits on TG0. Any ideas? -- Chris Viningre Website: ws5b.com Email: chris@...

With Hamvoip 1.7, I no longer see all the connections in node status