Hello, In mmdvm_bridge.service I set an environment to Environment=DVSwitch=/opt/MMDVM_Bridge4/DVSwitch4.ini The file is there working directory is there. But mmdvm_bridge4 log is telling the DVSWitch

Hi. Wondering if any work is in the pipeline for M17 support. I think now the time is right to really get my teeth into M17 and have been quite impressed so far with the amount of support it is gettin

Hey guys (gals), I have a desire/dream to build a device wherein I connect a UHF FM radio & antenna to, an interface board, a Raspberry Pi, and then some sort of spkr/mic/PTT arrangement that will all

Well what a great day it has been. Woke up this morning and found that my DVS server was hacked over night. I dumped that server and installed a new one on Vultr. I followed the instructions I had use

I am having an issue with the analog to dmr bridge. I did read a couple posts here and their solutions did not fix my issue. I can get dmr traffic to the analog side but it will not go from analog to

I managed to get a Vultr server running to bridge Allstar to our DMR talk group. I had node 54897 (on Vultr) registering on AllStarLink and also showing connected on my Brandmeister dashboard yesterda

Hello, I’m new here and hope I have right group! Have any of you connected this setup to a repeater controller without a hotspot or virtual server? A friend has set up a Raspberry Pi3 with the AMB3000

Hello, I’m new here and hope i h t right group! Have any of you connected this setup to a repeater controller without a hotspot or virtual server? A friend has set up a Raspberry Pi3 with the AMB3000

Hi there, I’m trying to get my copy of dvswitcH_server installed so that i can install analog_reflector. I’m trying to make it through menu 01, and am having difficulty reading some of the values. Is

I have an XLX reflector that is currently working great with DSTAR, DMR, and Fusion links. The XLX reflector runs on a Digital Ocean Droplet (cloud-based), and I have NWDigital AMBE dongles on a Raspb

Hello, for a few days, almost always you do not show me the callsign on the call screen or the elapsed time of these, but if they all appear correctly in the html page of the Dvswitch Server. I have r

Folks, I’m trying to run the dvs command after I’ve followed the instructions to install dvswitch on my pi4. what directory should I change to to run this command? This is not a card that is natively

Good afternoon, on Windows PC running Echolink in SysOp mode I can run a pre-recorded hourly message (.wav file) on an Echolink repeater, for hours have been trying to do same on my RPi4 running Allst

Folks, I was working with a fellow ham last night, and he showed me a version of DV switch that I could totally control from my browser from across the country. I was using an iPhone I went to the web

Greetings, I have a DMR to Analog bridge setup on a Pi running the DVSwitch server that has been working for the last few months. After a reboot it appears that I only have one-way audio from Analog t

I have a 2-year old installation of MMDVM_Bridge / DVSwitch that I am using for a YSF reflector -to- YSF reflector connection. Due to some network changes, the IP address of one of the reflectors has

I have an existing stretch VM running: P25Gateway version 20180409 P25Reflector version 20161101 P25Parrot version unknown, no support for --version, --help, etc. Quantar_Bridge version unknown, no su

I am at the point where i am about to pay someone to teamviewer into my pc and set this up for me... I have a private p25 server setup and running well on a remote server but not everyone has access t

I'm using a ~2-year old version of MMDVM_Bidge on a Raspberry Pi and have encountered a problem with traffic not going between a YSF reflector and a WIRES-X room. Are there release notes somewhere sho

Sorry for the noobie question. I wish to connect to FCS001 27 but I don't know how to set it up in DVSwitch. Apparently using 176.10.105.218:65000 is not enough. In fact I don't know how to point the