I have two different Android devices running dvswitch mobile to the same dvswitch server. When I register a USRP service and select a DMR TG it works fine as long as I am in a QSO. But as soon as I le

Hello, Currently I have DMR <> NXDN bridged using mmdvm_bridge. My XLX DMR is on 62030. I looked up the DMR <> P25 bridge diagram, I see that I need 1 instance of MB and 2 of AB. Since I have BM runni

I have been trying to configure my system to access the Free DMR network. I have tried using the information from this page http://www.freedmr.uk/index.php/pi-star-settings-for-hotspots/ Does not work

I've been helping a ham with a bridge and we got everything working however, the dashboard http://ysf.praredn.org/ is showing the DMR ID for the bridge's gateway id instead of the resolved callsign. I

Hi all, I have installed DV Switch on my server and all works fine. Was able to view the dashboard no problem. However, I have also installed a YSF Reflector on the same server and now the dashboard f

i've been following this site https://www.lucifernet.com/2020/01/08/build-a-p25-dmr-cross-mode-bridge/ as a starting ground but started coming up with errors ERROR 1 install-dvswitch-repo 100%[=======

Hi all. Hope this is the correct group . I have 2 ysf reflectors running on seperate raspberry pi's . These 2 reflectors are on the same lan and work fine etc. What i would like to do is link these 2

Hi de G6LUU Have installed Dv Switch on a second android device Which is a T320 nd I have a problem. It says on Status 'Not registered' . I cannot work out away round this problem , Tried the "Registe

I finally received my Alinco DR-135 and hooked it up this morning, but I am having a couple issues. I am currently testing it low power over a simplex freq. Eventually it will be setup as an in-band l

Hello All, Any tips how to setup STFU ? DVSWitch and Analog Reflector are already running on my VPS) and STFU section is already set in DVSWitch.ini 73 Toufik, F0DEI

Hi, I've been using DVSwitch server for a while now and everything is good. However I can't seem to find a way to gently shut it down when I want to. Either if I use the shutdown menu or just pull the

What is the format of the tune string for YSF. I am also wondering how I interpret what I find https://www.yaesu.com/jp/en/wires-x/id/active_room.php Into a YSF node list. I wanted to link up to CQ_UK

I installed DVSwitch-System-Builder on a VPS . Now I don't have the HBmonitor dasboard anymore because it uses the same port 9000 : File "/usr/local/lib/python3.7/dist-packages/twisted/internet/tcp.py

Hi, Well done for the devs who are really good qualities. Do we have the possibility to send the callsigns from the Node ASL to Analog_bridge, MMDVM_Bridge and vice versa. -- 73 to all. F1PTL Bruno

Hi there, I am trying to bridge ASL to two different DMR networks and understand that I need to run two instances of DV Switch to make this happen. I have MMDVM_Bridge, MMDVM_Bridge2, Analog_Bridge an

HI all, I’m Ben - ON5BGO from Belgium is there a how to guide to install and configure an YSF reflector ? And what are the hardware requirements for a good and stable works ? (sorry for this off-topic

Is it possible to normalize the audio on the DVSwitch server?

Question for the group, is there a way to block (blacklist) a station from connecting to a P25 Reflector? Thank you 73 Ted W6SAT

Steve, I have been having problems with ASL running in my Raspberry Pi 3B. I have a crontab to restart ASL overninght 00 00 * * * systemctl restart asterisk. So I have noticed: · CPU usage rises 12 ho

I have a ClearNode AllStar node that uses a DVSwitch bridge to get to DMR via Brandmeister server 3103 in the US. For some reason, in the last 2 or 3 weeks, if I connect to talk group 3142 (Pennsylvan