Hi folks, so I have MB > XLXd and the xlx dashboard shows the connection as a Repeater/Node of K7wBY B and the channel is blank. I tried adding Options=XLX:4008 to see if it would come up on Channel H

Is there a way to just set a basic TG for example “9” and be able to talk on what static TG we are on either on the BM or TGIF selfcare dash? Or do we have to constantly change it and restart analog b

Hey guys, Jed.n1jbc here. So, i'm brand new to this dvswitch thing, and honestly it seems pretty cool. So, the furthest i've gotten with it, is hooking it up to my allstar node, using a network radio.

Hi Steve, are you planning to support the new M17 protocol? Roby IV3JDV

Over the past few days I’ve noticed a change in the way the Inactivity timeout works. I have my system configured with a Startup TG of 10400 and an Inactivity Timer of 10 minutes. The way I’m accustom

Hello I am setting up DVSwitch to connect to an AllStar node in my house. I can connect to it using IAXRPT on the PC, but when I try this with DVSwitch, it goes into a loop connecting and disconnectin

Monday noticed a couple issues on my system, D-STAR wasn't passing audio both ways and other mode dashboards were not populating the call signs (had the numeric DMR ID). Running the update manually: .

Hello Dimitri, I have had good success (mostly) using a Nextion screen with MMDVM_Bridge. It works well on Receive but not at all on transmit. Transmit is not too much of a problem though as it’s only

Hi, I've been running a multimode gateway using AllStar and DVSwitch for the better part of 2 months. Currently, on the digital side, I support DMR (Brandmeister), D-STAR (My own XLX), YSF and P25. Th

My goal is to interface my Allstar to DVSWitch in a manner somewhat like the DVSWitch mobile app where I can change Modes and TG/Rooms/Reflectors from an analog radio keypad once connected to Allstar.

I am thinking of setting up a second DVSwitch server. I currently have port forwarding enabled on my router for the first server. So my question is: Would I run into problems having a 2nd server?

Could someone enlighten me was to what "Macro Result 256" means. I know 0 means success I assume 256 is abject failure?

It means AD has seen traffic from repeater ID 0 or subscriber ID 0 (more likely) What hardware are you running and have you updated from github the MB and AB binaries? Steve N4IRS

Having a issue running a DVSwitch bridge from an FCS room to DMR. Bridge is setup and working but in the MMDVM_Bridge log after every transmission to the MMDVM_Bridge from the FCS room through YSFGate

Followed instructions cd /tmp wget https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip cd /srv unzip /tmp/master.zip mv DVSwitch-System-Builder-master DVSwitch-System-Builder cd DVS

Hi Guys I'm running two pi's on DV switch on DMR on two different TG's.In MMDVM.INI I have my DMR ID along with two different numbers appended at the end of my ID.(05,06)on both pi's I'm getting cross

How do i connect my bridge on the TGIF network

Hello , I have now an Anysecu B01 Bluetooth Microphone, it's a great Bluetooth mic that work very well with Zello app. The normal BT mode connected to any mobile phone make a great Rx sound and modula

Hi guys, I have made a YSF setup on my rasperry's mmdvm switch mobile, and it's run fine BUT there is an issue : When I select the "Room Italy" (my country) or another ysf room, I can trasmit only to

Hello Guys, Its possible to change the RID or TG into the USRPaudio.py? I make a modification that I can transmit some Wav files. It work but I will transmit File one in TG9 and file Two in TG8 Maybe