|
radioid.net URL update in dvswitch.sh 13 messages
Monday noticed a couple issues on my system, D-STAR wasn't passing audio both ways and other mode dashboards were not populating the call signs (had the numeric DMR ID). Running the update manually: .
Monday noticed a couple issues on my system, D-STAR wasn't passing audio both ways and other mode dashboards were not populating the call signs (had the numeric DMR ID). Running the update manually: .
|
By Jeffrey [K8JTK]
·
|
|
MMDVM log 2 messages
#mmdvm_bridge
Hello Dimitri, I have had good success (mostly) using a Nextion screen with MMDVM_Bridge. It works well on Receive but not at all on transmit. Transmit is not too much of a problem though as it’s only
Hello Dimitri, I have had good success (mostly) using a Nextion screen with MMDVM_Bridge. It works well on Receive but not at all on transmit. Transmit is not too much of a problem though as it’s only
|
By David Martin
·
|
|
Passing Meetadata/Best Practice
Hi, I've been running a multimode gateway using AllStar and DVSwitch for the better part of 2 months. Currently, on the digital side, I support DMR (Brandmeister), D-STAR (My own XLX), YSF and P25. Th
Hi, I've been running a multimode gateway using AllStar and DVSwitch for the better part of 2 months. Currently, on the digital side, I support DMR (Brandmeister), D-STAR (My own XLX), YSF and P25. Th
|
By Tony Langdon
·
|
|
ASL to DVSwitch Assistance 2 messages
My goal is to interface my Allstar to DVSWitch in a manner somewhat like the DVSWitch mobile app where I can change Modes and TG/Rooms/Reflectors from an analog radio keypad once connected to Allstar.
My goal is to interface my Allstar to DVSWitch in a manner somewhat like the DVSWitch mobile app where I can change Modes and TG/Rooms/Reflectors from an analog radio keypad once connected to Allstar.
|
By Jay
·
|
|
2nd DVSwitch server and port forwarding. 2 messages
I am thinking of setting up a second DVSwitch server. I currently have port forwarding enabled on my router for the first server. So my question is: Would I run into problems having a 2nd server?
I am thinking of setting up a second DVSwitch server. I currently have port forwarding enabled on my router for the first server. So my question is: Would I run into problems having a 2nd server?
|
By
Derek William Haden
·
|
|
Macro Result 256 2 messages
Could someone enlighten me was to what "Macro Result 256" means. I know 0 means success I assume 256 is abject failure?
Could someone enlighten me was to what "Macro Result 256" means. I know 0 means success I assume 256 is abject failure?
|
By
Derek William Haden
·
|
|
Repeater ID (0) cannot be the same as sibscriber ID (0)
It means AD has seen traffic from repeater ID 0 or subscriber ID 0 (more likely) What hardware are you running and have you updated from github the MB and AB binaries? Steve N4IRS
It means AD has seen traffic from repeater ID 0 or subscriber ID 0 (more likely) What hardware are you running and have you updated from github the MB and AB binaries? Steve N4IRS
|
By Steve N4IRS
·
|
|
MMDVM_Bridge bug ???
Having a issue running a DVSwitch bridge from an FCS room to DMR. Bridge is setup and working but in the MMDVM_Bridge log after every transmission to the MMDVM_Bridge from the FCS room through YSFGate
Having a issue running a DVSwitch bridge from an FCS room to DMR. Bridge is setup and working but in the MMDVM_Bridge log after every transmission to the MMDVM_Bridge from the FCS room through YSFGate
|
By David Young
·
|
|
DVSwitch-System-Builder 404 error 6 messages
Followed instructions cd /tmp wget https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip cd /srv unzip /tmp/master.zip mv DVSwitch-System-Builder-master DVSwitch-System-Builder cd DVS
Followed instructions cd /tmp wget https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip cd /srv unzip /tmp/master.zip mv DVSwitch-System-Builder-master DVSwitch-System-Builder cd DVS
|
By
Derek William Haden
·
|
|
Talkover my talk groups 2 messages
Hi Guys I'm running two pi's on DV switch on DMR on two different TG's.In MMDVM.INI I have my DMR ID along with two different numbers appended at the end of my ID.(05,06)on both pi's I'm getting cross
Hi Guys I'm running two pi's on DV switch on DMR on two different TG's.In MMDVM.INI I have my DMR ID along with two different numbers appended at the end of my ID.(05,06)on both pi's I'm getting cross
|
By Pete Fierro
·
|
|
How do i connect my bridge on the TGIF network 2 messages
How do i connect my bridge on the TGIF network
How do i connect my bridge on the TGIF network
|
By Jeremy WX8NWS 3169368
·
|
|
Anysecu / Inrico B01 BT Microphone 3 messages
Hello , I have now an Anysecu B01 Bluetooth Microphone, it's a great Bluetooth mic that work very well with Zello app. The normal BT mode connected to any mobile phone make a great Rx sound and modula
Hello , I have now an Anysecu B01 Bluetooth Microphone, it's a great Bluetooth mic that work very well with Zello app. The normal BT mode connected to any mobile phone make a great Rx sound and modula
|
By Jose - EA5SW
·
|
|
YSF on mmdvm switch mobile, help setup, please 4 messages
Hi guys, I have made a YSF setup on my rasperry's mmdvm switch mobile, and it's run fine BUT there is an issue : When I select the "Room Italy" (my country) or another ysf room, I can trasmit only to
Hi guys, I have made a YSF setup on my rasperry's mmdvm switch mobile, and it's run fine BUT there is an issue : When I select the "Room Italy" (my country) or another ysf room, I can trasmit only to
|
By
IZ4BKK
·
|
|
USRPaudio Transmitting TG / RID
Hello Guys, Its possible to change the RID or TG into the USRPaudio.py? I make a modification that I can transmit some Wav files. It work but I will transmit File one in TG9 and file Two in TG8 Maybe
Hello Guys, Its possible to change the RID or TG into the USRPaudio.py? I make a modification that I can transmit some Wav files. It work but I will transmit File one in TG9 and file Two in TG8 Maybe
|
By Kim-Benjamin Lütkemeier
·
|
|
USRP
Hey guys seem to be having a strange issue when transmitting. Just curious to what everyone has there usrp setting at. Apparently I’m having like a clicking over modulation on my side. Mine is current
Hey guys seem to be having a strange issue when transmitting. Just curious to what everyone has there usrp setting at. Apparently I’m having like a clicking over modulation on my side. Mine is current
|
By Aaron Groover
·
|
|
#mmdvm_bridge
#mmdvm_bridge
why is there echoing from my node ?
why is there echoing from my node ?
|
By Jeremy WX8NWS 3169368
·
|
|
md380-emu 3 messages
Hey guys I been running only just the bridge and MMDVM. However never really played with the 380. What exactly is it for? Multiple connects and such? -- Thank You, Aaron Groover (610) 379 6148 K3ALG@.
Hey guys I been running only just the bridge and MMDVM. However never really played with the 380. What exactly is it for? Multiple connects and such? -- Thank You, Aaron Groover (610) 379 6148 K3ALG@.
|
By Aaron Groover
·
|
|
MMDVM_Bridge segment fault issue 3 messages
Hi all. I have been riding for 2 mmdvm_bridge for 1 years already. 1 link my ysf reflector and the other another ysf reflector . for 4 days an instance has stopped by itself and the only message is se
Hi all. I have been riding for 2 mmdvm_bridge for 1 years already. 1 link my ysf reflector and the other another ysf reflector . for 4 days an instance has stopped by itself and the only message is se
|
By swinger72@...
·
|
|
XLX Reflector to DMR talk group bridge on server cloud issue 3 messages
Ok, I read through the earlier posts on using DVSwitch to bridge XLX reflector to DMR talk group. Per what I read there was an addition made to MMDVM_Bridge which when using DVSwitch would allow bridg
Ok, I read through the earlier posts on using DVSwitch to bridge XLX reflector to DMR talk group. Per what I read there was an addition made to MMDVM_Bridge which when using DVSwitch would allow bridg
|
By David Young
·
|
|
DMR to Analog ASL Bridge 2 messages
Okay, I know this has probably been asked many times before. I did do a search, with lots of results that comes back, almost too much information. :) I am wondering what the most current (easiest) way
Okay, I know this has probably been asked many times before. I did do a search, with lots of results that comes back, almost too much information. :) I am wondering what the most current (easiest) way
|
By Marshall Oldham
·
|