Hi need help how to set up the dvswich to link YSF to dmr and fusion repeater with raspberry 3+ or 4+ anyone has the steps how set it up any help will be appreciated

Has anyone run across the authentication error messages below? root@AI6BX-DMR:~# tail -f /var/log/dmrlink/dmrlink.log INFO (ALL IPSC SYSTEMS) Rule timer loop started WARNING (RIFFNET) AuthError: IPSC

I am going to rebuild my node. I lost track of so many changes that I cant get audio from ASL to YSF and back. I just have a quick question. in rpt.conf, Can i run the hub and usrp at the same time on

We have set up and configure a new YSF for our group a week ago. The YSF named US YSF MIAMI is showing on the Pi-Star software list as well in the DV4mini, openSPOT, etc. list. My question, How long i

Would appreciate it if a DSTAR guru could answer a few questions about DSTAR registration. Do have my analog bridge at least working with DCS reflectors at this point. Knew very little about DSTAR whe

I have more than a year for our new public safety building. We have our own room just outside of the EOC. The conference room is in a different part of the building. I wasn't allowed to place coax int

Anyone help please. Aalog_Bridge setting. run asterisk -c but ASL to DMR Bridge.pdf I used my DMR radio and HotSpot to transmitting on Time Slot 2 Talk Group 842(IPSC-KOREA) to generate traffic. but n

I have been troubleshooting a broken OB for a while now and see this in the logs INFO 2020-01-02 11:28:08,480 (OBP-3103) *TIME OUT* STREAM ID: 92891814 SUB: 3141379 PEER: 310885350 TGID: 310815 TS 1 D

Steve I have a question. Whenever my application uses dvswitch.sh to change TG, Analog_Bridge also sends MMDVM_Bridge to the network and a short broadcast to the network. Is it necessary to switch TG

Hi Folks! I have 2 nodes running. Node 505501 ASL<>DMR DV-Switch Bridge on one Raspberry Pi and Stand alone Node 505500 Raspberry Pi remote base UHF. When the two nodes are linked, I get what sounds l

Happy New Year Everyone, I am trying to bridge ASL directly to YSF/FCS. We are trying to avoid conflict with Brandmeister requirements at the moment which is why we are considering to bridge ASL and F

Hi: I have Analog_Bridge currently set up to send unity gain from DMR to ASL, and ASL to DMR at TLV gain factor 0.34. Over all, this works pretty well, but I would like to raise quieter DMR audio into

* I am working to get HB_Bridge running however get the following errors: CannotListenError: Couldn't listen on any:31002: [Errno 98] Address already in use. Netstat shows that the port is not in use

New here still learning my way around AllStar and DV-Switch . I get the following message after running systemctl status asterisk: ● asterisk.service - Asterisk PBX and telephony daemon Loaded: loaded

I took a few weeks away from this project and am back at it now. As my ultimate goal involved linking DMRlink with HBlink with the corresponding IPSC_Bridge and HB_Bridge, I have stepped back a little

DV switch friends, I just upgraded from x86 CentOS to a PI 3. I installed hamviop however I want to have ALLstar/Echolink/DMR/Yeasu on one pi. Friend who is helping me install the bridges said to inst

Hello Folks, I have a question... I have two VMs on two different hosts. One One I am running ASL<->YFSN on the other I am running a YSF Reflector. What I would like to do is connect the ASL-YSFN to t

Greetings folks! I am struggling a little. I have DVSwitch running on Raspberry pi. All is working as it should in general. However, I want to change the DMR talk group from 315136 to 315135. I have c

Hey gang. I've been running the Crompton Allstar image for about a year and just added the dmr integration to my node. While it is running well I would like to ask if there is a way to change TG on th

I am trying to gateway ASL to XLX DMR. Here is a diagram of what I have implemented. Cloud Server 1 ASL Asterisk (Pvt Node and Public Node) <===> Analog Bridge <===> MMDVM Bridge <===> DMR Gateway (fr