Hi All I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks. I have followed the instr

Hello all, Is there any document/guidance on building a YSF to DMR (BM) connection the right way? Here's the situation.... I run XLX330 using xlxd + ambed. At one point it was working across all three

I'm getting reports of audio coming from ASL to YSF via Analog Bridge that's too loud. What are you preferred audio levels like on your servers?

All, we have a PI running XLX With interlinks to BM and DV3000 to DStar. I also have a ASL with analog_bridge <> mmdvm <> BM i want to connect our mmdvm_bridge directly to the XLX to reduce lag and ho

Evening all, I am pretty new to the MMDVM_Bridge software and was trying have a bridge from private hblink server to p25 networks. to do this i was trying HBlink ----> DMR2YSF -----> YSF2P25 -----> P2

Where do I find the ASL_node_list.txt file? I would like to make some modifications but when I do the ./dvswitch.sh collectProcessDataFiles command, it doesn't appear in /tmp and I get a "ASL node lis

Hi Guys. Thanks for your patence in advance ;-) Newby installing and learning but fell at the firt jump. Debain 10 on a VPS. I'm SSH into it and I'm getting so far then seeing... root@45:~/DVSwitch-Sy

Is there a ARM image available (PI 4) that has ASL, DVSWitch already installed? I have made a few now using HAMVOIP and DVSwitch but the ASL to DMR is only so so even with a DV3000 USB dongle. Hoping

I am seeing that Buster has been renamed to Raspbian Buster, is that the one to use to start the process of setting up DVswitch? Dick W4RSS

Hi All, Can you help me with the error below? it seems that theres an error on port when clicking the marco<>Mode Select <> DMR on mobile phone port 31100 will close. I: 2020-06-03 04:51:38.416 MESSAG

I am currently in the process of ASL <--> DSTAR. I've been pulling my hair out this weekend attempting to install ircDDBGateway as part of the bridge. I have no GUI available on my server, and don't w

Hi: I have a bridge set up using AGC with the following parameters: usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 0.50 ; Gain factor when usrpAu

If I try to run dvswitch on a pi zero, mmdvm_bridge and analog_bridge, they work apparently fine, but the md380-emu boots, but upon starting the conversion it returns an error. root@raspberrypi:/opt/m

Steve please, where is the DVSM_Update.sh script, in the new service update_data_files.system Thank you.

Hi All, I am attempting to use a modified version of AMBESever in order to use a DVMega AMBE 3000 board that's not supported by Analog_Bridge (Github Issue). However, Analog_Bridge binds to the rxPort

Just wondering if anyone has wired a nextion directly to rpi to get info sent to Nextion screen? If so what files would have to be modified if any? I'm using rpi with dvsm as a stand alone way to acce

Hi All, I've recently been playing with the DVSwitch software again after a bit a hiatus . The pre-compiled packages are a dream so thanks to everyone involved. I am in the process of setting up a D-S

I would like to bridge FCS rooms from 2 or more FCS servers using just one installed instance of the DVSwitch modules on a raspberry pi4. Is this possible? If so what would I need to modify or add? I

Hello All, A while ago, I have setup successfully two separate bridges one from BM to YSF and one from YSF to XLX. Worked fine for a while. Now somebody connects every few minutes via a YSF Gateway fr

I'm trying to install the Dashboard and using the set-by-step instructions and get to step 5 where php must be installed but keep receiving the following errors when I try to install 5 or 7: Package p