|
Analog audio streaming 5 messages
Hi Thanks to the team here, I run successfully for my needs a main server HBLink with HBMonitor on line, connected to them (HotSpots)<=>(HotSpots)<=>(BM) also (HBLink)<=>(IPSC2)<=>(NXDN)<=>( ALS)<=>(M
Hi Thanks to the team here, I run successfully for my needs a main server HBLink with HBMonitor on line, connected to them (HotSpots)<=>(HotSpots)<=>(BM) also (HBLink)<=>(IPSC2)<=>(NXDN)<=>( ALS)<=>(M
|
By sv1hep@...
·
|
|
Audio settings and other associated handsfree opitions 2 messages
A few years ago, when the application was in Beta tester mode, I listened to a presentation about what DVswitch would do. Most of those declared goals have been achieved. However, trying to use this a
A few years ago, when the application was in Beta tester mode, I listened to a presentation about what DVswitch would do. Most of those declared goals have been achieved. However, trying to use this a
|
By Richard W4JXA
·
|
|
ASL->TGIF Prime 2 messages
#analog_bridge
#mmdvm_bridge
#dmrlink
Hello, I have a Archlinux Hamvoip node that I pulled down Dvswitch from the repository and have ASL<->Prime TGIF working. I have the audio levels sounding pretty good after tweaking some on the Analog
Hello, I have a Archlinux Hamvoip node that I pulled down Dvswitch from the repository and have ASL<->Prime TGIF working. I have the audio levels sounding pretty good after tweaking some on the Analog
|
By Justin Painter
·
|
|
XLX Reflector 3 messages
I am looking into installing an XLX reflector. Would it be possible to run this on the same server as DVSwitch? Also what are the advantages of using an XLX reflector with DVSwitch? I’ve found a few s
I am looking into installing an XLX reflector. Would it be possible to run this on the same server as DVSwitch? Also what are the advantages of using an XLX reflector with DVSwitch? I’ve found a few s
|
By N4UPC - Scott
·
|
|
Tuning 30 messages
Is it possible to ‘tune’ DVSwitch for better voice quality?
Is it possible to ‘tune’ DVSwitch for better voice quality?
|
By N4UPC - Scott
·
|
|
ircddbgateway running but not using DStar? 3 messages
I have a DVS system that I never use for DStar but the ircddbgateway still runs? Is this necessary? if NOT how do I stop it? -- Derek G4WXN
I have a DVS system that I never use for DStar but the ircddbgateway still runs? Is this necessary? if NOT how do I stop it? -- Derek G4WXN
|
By G4WXN@...
·
|
|
Free DMR with DVS 10 messages
I have been trying to configure my system to access the Free DMR network. I have tried using the information from this page http://www.freedmr.uk/index.php/pi-star-settings-for-hotspots/ Does not work
I have been trying to configure my system to access the Free DMR network. I have tried using the information from this page http://www.freedmr.uk/index.php/pi-star-settings-for-hotspots/ Does not work
|
By G4WXN@...
·
|
|
What Ports need to be forwarded? 8 messages
I currently have the IP address of my DVswitch set to the DMZ in my router, and I would like to just forward the individual ports that I need forwarded for it to work. Im using DVswitch to link analog
I currently have the IP address of my DVswitch set to the DMZ in my router, and I would like to just forward the individual ports that I need forwarded for it to work. Im using DVswitch to link analog
|
By Frank C. D'Amato
·
|
|
Active DMR TGs 4 messages
What would you say the top three most active DMR talkgroups are, please? Thanks!
What would you say the top three most active DMR talkgroups are, please? Thanks!
|
By N4UPC - Scott
·
|
|
DVMEGA 76 messages
If I follow the "DVSwitch Installation and User Guide v1.61.pdf" and put DVSwitch on a RasPi 4 (4GB) can I use the DVstick30 on the RasPi? Also, what's the best way to also get AllStar on the RasPi? T
If I follow the "DVSwitch Installation and User Guide v1.61.pdf" and put DVSwitch on a RasPi 4 (4GB) can I use the DVstick30 on the RasPi? Also, what's the best way to also get AllStar on the RasPi? T
|
By N4UPC - Scott
·
|
|
dv switch losing connection with my allstar node
Hey guys, Hope everyone is doing well. So a bit of a mystery. I have dvswitch setup on my device to connect to my allstar node. It works,, no sweat. I can connect to the node, make outbound connection
Hey guys, Hope everyone is doing well. So a bit of a mystery. I have dvswitch setup on my device to connect to my allstar node. It works,, no sweat. I can connect to the node, make outbound connection
|
By Jed Barton
·
|
|
One Way Traffic ASL to YSF 11 messages
I have a Private Node (set up exactly as the Example Node) for a YSF Reflector ASL<->AB<->MB<->YSF. AB and MB exist in a Cloud Server. I can transmit through my ASL Node to the YSF Reflector with out
I have a Private Node (set up exactly as the Example Node) for a YSF Reflector ASL<->AB<->MB<->YSF. AB and MB exist in a Cloud Server. I can transmit through my ASL Node to the YSF Reflector with out
|
By Jay
·
|
|
DV Switch Server 3 messages
I want to add DVSwitch Server to my system. Currently I have ASL along with Analog Bridge and MMDVM Bridge in one Raspberry Pi. Can I add DV Switch Server in here as well? Once installed would DVSwitc
I want to add DVSwitch Server to my system. Currently I have ASL along with Analog Bridge and MMDVM Bridge in one Raspberry Pi. Can I add DV Switch Server in here as well? Once installed would DVSwitc
|
By Steve Siesel [K4KSA]
·
|
|
MMDVM_Bridge.ini 5 messages
#mmdvm_bridge
What instructions did you follow?
What instructions did you follow?
|
By john.sutton45@...
·
|
|
Help with YCS Server connection 2 messages
I want to connect to the Ysf side of the YCS Server. Works ok If I connect to the Fcs side At the moment I have. Ysfreflector to MB to MB to Ysfgateway to YCS (Ysf DG-ID 35) Traffic passes from the Yc
I want to connect to the Ysf side of the YCS Server. Works ok If I connect to the Fcs side At the moment I have. Ysfreflector to MB to MB to Ysfgateway to YCS (Ysf DG-ID 35) Traffic passes from the Yc
|
By Ernie Gm7kbk
·
|
|
Hotspot Audio for C4FM Very loud and distorted. 9 messages
I have DVswitch setup DMR>Analog. It pushes a DMR TG to my Hamvoip Allstar node (2 seperate Pi's). When I talk on the analog radio, the audio sounds great coming out of my DMR radio connected to a Ope
I have DVswitch setup DMR>Analog. It pushes a DMR TG to my Hamvoip Allstar node (2 seperate Pi's). When I talk on the analog radio, the audio sounds great coming out of my DMR radio connected to a Ope
|
By Frank C. D'Amato
·
|
|
Dashboard no Workie 33 messages
Installed DVSwitch on a debian 9 amazon AWS, used the dvswitch builder for the install. No joy on the dashboard...I've opened port 80 on the instance... 403 forbidden when I enter the public IP addres
Installed DVSwitch on a debian 9 amazon AWS, used the dvswitch builder for the install. No joy on the dashboard...I've opened port 80 on the instance... 403 forbidden when I enter the public IP addres
|
By William WY7WL
·
|
|
Restarting DVSwitch Services 6 messages
Hi, I have noticed that when restarting services via the "dvs" menu “Restart DVSwitch Services” or using the “Drop Dynamic TGs” in the DVSM App, the DMR server always returns to a particular server. W
Hi, I have noticed that when restarting services via the "dvs" menu “Restart DVSwitch Services” or using the “Drop Dynamic TGs” in the DVSM App, the DMR server always returns to a particular server. W
|
By g8ptn@...
·
|
|
MMDVM_Bridge [INFO] for brandmeister 7 messages
#brandmeister
#mmdvm_bridge
My MMDVM_Bridge.ini has the following [Info] RXFrequency=444775000 TXFrequency=449775000 Power=200 Latitude=40.789737 Longitude=-76.121412 Height=550 Location=Barnesville, PA Description=W3TWA MMDVM_B
My MMDVM_Bridge.ini has the following [Info] RXFrequency=444775000 TXFrequency=449775000 Power=200 Latitude=40.789737 Longitude=-76.121412 Height=550 Location=Barnesville, PA Description=W3TWA MMDVM_B
|
By Frank C. D'Amato
·
|
|
WA3XYZ PL 88.5 Announcement 18 messages
#analog_bridge
#mmdvm_bridge
I finally got the DVswitch up and running. The Analog to dmr link is working fine. The only issue I have, is every 10 minutes, this ID is played ONLY on the DMR TG (Not the analog side) Anyone know wh
I finally got the DVswitch up and running. The Analog to dmr link is working fine. The only issue I have, is every 10 minutes, this ID is played ONLY on the DMR TG (Not the analog side) Anyone know wh
|
By Frank C. D'Amato
·
|