|
Reliable Transcoding with Brandmeister DMR - Who and How? 12 messages
I'm back again and still looking for someone who can share some best practices for reliable transcoding with BrandMeister DMR. I realize this is not an XLX/Ambed support forum, but I think this descri
I'm back again and still looking for someone who can share some best practices for reliable transcoding with BrandMeister DMR. I realize this is not an XLX/Ambed support forum, but I think this descri
|
By J M
·
|
|
pyUC Client Installation issue 8 messages
Hi Steve, I am running Mint 18.3 because that is the last version that can run Allstar's Web Transceiver. I don't think I'd have a problem if I was running Mint 19 or 20. They have an more recent vers
Hi Steve, I am running Mint 18.3 because that is the last version that can run Allstar's Web Transceiver. I don't think I'd have a problem if I was running Mint 19 or 20. They have an more recent vers
|
By JerryL
·
|
|
Unable to connect to Brandmeister using HBlink 15 messages
#hblink
Hi, Recently I am no longer able to connect to Brandmeister. Below are the fail logs that I keep on getting: INFO 2020-12-05 19:24:48,178 (BMR30262) Sending login request to master 158.69.203.89:62031
Hi, Recently I am no longer able to connect to Brandmeister. Below are the fail logs that I keep on getting: INFO 2020-12-05 19:24:48,178 (BMR30262) Sending login request to master 158.69.203.89:62031
|
By ve6gcd@...
·
|
|
Configuration script
Hi. I don't know if this has been asked before, so please bear with me. Some friends have asked me to help them configure the server. And since having to do this all the time is a nuisance I wonder: i
Hi. I don't know if this has been asked before, so please bear with me. Some friends have asked me to help them configure the server. And since having to do this all the time is a nuisance I wonder: i
|
By IK7VXC Mike
·
|
|
Another support option 17 messages
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribe
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribe
|
By Steve N4IRS
·
|
|
P25 does not use the AMBE USB Stick instead using software emulation 2 messages
Hi ive running 2 Raspi 4b with dvswitch 1.60 server in combination with a DV30 AMBE USB Stick.Nearly all works fine with the Stick only P25 did not use the Stick ( visible on LED for en/decoding on th
Hi ive running 2 Raspi 4b with dvswitch 1.60 server in combination with a DV30 AMBE USB Stick.Nearly all works fine with the Stick only P25 did not use the Stick ( visible on LED for en/decoding on th
|
By Stefsan
·
|
|
Update and upgrade errors 10 messages
I had to do an update and upgrade via apt-get update and upgrade on my p25 to DMR Raspberry pi to get MMDVM Bridge to connect to a XLX reflector it does work but what is this error? pi@raspberrypi:~ $
I had to do an update and upgrade via apt-get update and upgrade on my p25 to DMR Raspberry pi to get MMDVM Bridge to connect to a XLX reflector it does work but what is this error? pi@raspberrypi:~ $
|
By Kevin N9OIG
·
|
|
HTML client and Analog Reflector release information
Over the past few months we have been working on the release of the HTML client (hUC) for DVSwitch. This is new server component called Analog_Reflector (AR). The purpose of AR is to server the HTML c
Over the past few months we have been working on the release of the HTML client (hUC) for DVSwitch. This is new server component called Analog_Reflector (AR). The purpose of AR is to server the HTML c
|
By Steve N4IRS
·
|
|
#dmrlink #dmrlink #best_practices 3 messages
#dmrlink
#best_practices
I am back at trying to set up a simple dmrlink master to network a group of MotoTrbo repeaters. I had this going some time ago and then stepped away. The server has blown up so I am installing dmrlink
I am back at trying to set up a simple dmrlink master to network a group of MotoTrbo repeaters. I had this going some time ago and then stepped away. The server has blown up so I am installing dmrlink
|
By ai6bx
·
|
|
Switch Between BM and TGIF 53 messages
Right now, I change address in MB to switch DMR networks. Is there any way to use a macro to the same function? -- Tx ... Tom VE3NY
Right now, I change address in MB to switch DMR networks. Is there any way to use a macro to the same function? -- Tx ... Tom VE3NY
|
By Tom Corcoran
·
|
|
For you to look at,
Steve, No issues here but wanted to pass this screen shot to you with what happens when ASL sends a text message on Key up. It sends that graphic and not my callsign…I just wanted to let you see it an
Steve, No issues here but wanted to pass this screen shot to you with what happens when ASL sends a text message on Key up. It sends that graphic and not my callsign…I just wanted to let you see it an
|
By Steve Siesel [K4KSA]
·
|
|
after 3 days of searching, I give up. need help 3 messages
#analog_bridge
#mmdvm_bridge
I have a vps that run both allstarlink and dvswitch the install went well and I was able to connect to asl did a link to Hamshack Hotline and all is working. I also have a iaxrpt connection and I can
I have a vps that run both allstarlink and dvswitch the install went well and I was able to connect to asl did a link to Hamshack Hotline and all is working. I also have a iaxrpt connection and I can
|
By Pierre Martel
·
|
|
P25 to DMR/XLX 8 messages
I would like to add P25 to XLX I've looked through this mailing list and the consensus seems to be I need the following: <P25_Reflector> <-> <P25 gateway> <-><MMDVM_Bridge> <-> <Analog_Bridge> <-> <An
I would like to add P25 to XLX I've looked through this mailing list and the consensus seems to be I need the following: <P25_Reflector> <-> <P25 gateway> <-><MMDVM_Bridge> <-> <Analog_Bridge> <-> <An
|
By Jon 2E0OPT
·
|
|
Dashboard change time zone 13 messages
Good Morning! How do I change the time zone on the P25Reflector Dashboard by DG9VH? I have tried changing in the config.php and reloading apache with no change. date_default_timezone_set ( ' UTC ' );
Good Morning! How do I change the time zone on the P25Reflector Dashboard by DG9VH? I have tried changing in the config.php and reloading apache with no change. date_default_timezone_set ( ' UTC ' );
|
By Michael KD5DFB
·
|
|
IPSC_Bridge<->HB_Bridge on VirMach VPS Question 3 messages
Has anyone by chance managed to get IPSC_Bridge<->HB_Bridge to run on a VirMach VPS (Elite+ LITE Package) with Debian 9 OS? I have tried on and off for more than a year to try to get it to work. Prior
Has anyone by chance managed to get IPSC_Bridge<->HB_Bridge to run on a VirMach VPS (Elite+ LITE Package) with Debian 9 OS? I have tried on and off for more than a year to try to get it to work. Prior
|
By Jon K1IMD
·
|
|
P25Gateway Unlinking from static talkgroup / MMDVM_Bridge Disconnecting from HBLink 5 messages
#mmdvm_bridge
Good Morning all, I am having a problem with P25 Gateway stating "M: 2021-02-18 12:32:38.340 Unlinking from 31660 due to inactivity" P25 Gateway config [Network] Port=42010 HostsFile1=/etc/P25Hosts.tx
Good Morning all, I am having a problem with P25 Gateway stating "M: 2021-02-18 12:32:38.340 Unlinking from 31660 due to inactivity" P25 Gateway config [Network] Port=42010 HostsFile1=/etc/P25Hosts.tx
|
By Chris Whitam
·
|
|
NXDN bug: it shows the callsign of a Japanese ham 4 messages
I just finished installing dvswitch server and everything seems to be working fine, except when I key up in NXDN: instead of my callsign, it's shown the callsign of a Japanese ham!!!!!!! This happens
I just finished installing dvswitch server and everything seems to be working fine, except when I key up in NXDN: instead of my callsign, it's shown the callsign of a Japanese ham!!!!!!! This happens
|
By IK7VXC Mike
·
|
|
DVSwitch Server 4 messages
Steve.. On my new Vultr server I have ASL running and had DVSwitch-server. I thought something was wrong so in removed it. Upon re-install all of the files did not populate. Here is a sample of the An
Steve.. On my new Vultr server I have ASL running and had DVSwitch-server. I thought something was wrong so in removed it. Upon re-install all of the files did not populate. Here is a sample of the An
|
By Steve Siesel [K4KSA]
·
|
|
MMDVM Bridge and YSF Reflector don´t talk to each other 2 messages
Thats a special one for Steve... I´m debugging a MMDVM_Bridge and YSF Reflector combo. Worked before but not anymore. I have another installation of a MMDVM_Bridge and YSF Reflector combo that works f
Thats a special one for Steve... I´m debugging a MMDVM_Bridge and YSF Reflector combo. Worked before but not anymore. I have another installation of a MMDVM_Bridge and YSF Reflector combo that works f
|
By Uli
·
|
|
HBlink <---> IPSC2 ...............Question using OpenBridge 3 messages
Hi I'm told you guys might be able to help me. I have a HBlink server that I want to connect via OpenBridge. So far i have not been sucessfull. I'm hearing that DVswitch might be my solution. If so ca
Hi I'm told you guys might be able to help me. I have a HBlink server that I want to connect via OpenBridge. So far i have not been sucessfull. I'm hearing that DVswitch might be my solution. If so ca
|
By Adrianm0glj@...
·
|