Is there a ARM image available (PI 4) that has ASL, DVSWitch already installed? I have made a few now using HAMVOIP and DVSwitch but the ASL to DMR is only so so even with a DV3000 USB dongle. Hoping

I am seeing that Buster has been renamed to Raspbian Buster, is that the one to use to start the process of setting up DVswitch? Dick W4RSS

Hi All, Can you help me with the error below? it seems that theres an error on port when clicking the marco<>Mode Select <> DMR on mobile phone port 31100 will close. I: 2020-06-03 04:51:38.416 MESSAG

I am currently in the process of ASL <--> DSTAR. I've been pulling my hair out this weekend attempting to install ircDDBGateway as part of the bridge. I have no GUI available on my server, and don't w

Hi: I have a bridge set up using AGC with the following parameters: usrpAudio = AUDIO_USE_AGC ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC) usrpGain = 0.50 ; Gain factor when usrpAu

If I try to run dvswitch on a pi zero, mmdvm_bridge and analog_bridge, they work apparently fine, but the md380-emu boots, but upon starting the conversion it returns an error. root@raspberrypi:/opt/m

Steve please, where is the DVSM_Update.sh script, in the new service update_data_files.system Thank you.

Hi All, I am attempting to use a modified version of AMBESever in order to use a DVMega AMBE 3000 board that's not supported by Analog_Bridge (Github Issue). However, Analog_Bridge binds to the rxPort

Just wondering if anyone has wired a nextion directly to rpi to get info sent to Nextion screen? If so what files would have to be modified if any? I'm using rpi with dvsm as a stand alone way to acce

Hi All, I've recently been playing with the DVSwitch software again after a bit a hiatus . The pre-compiled packages are a dream so thanks to everyone involved. I am in the process of setting up a D-S

I would like to bridge FCS rooms from 2 or more FCS servers using just one installed instance of the DVSwitch modules on a raspberry pi4. Is this possible? If so what would I need to modify or add? I

Hello All, A while ago, I have setup successfully two separate bridges one from BM to YSF and one from YSF to XLX. Worked fine for a while. Now somebody connects every few minutes via a YSF Gateway fr

I'm trying to install the Dashboard and using the set-by-step instructions and get to step 5 where php must be installed but keep receiving the following errors when I try to install 5 or 7: Package p

Possible Loop in Qso TG 21461 in BrandMeister, we were three friends, EA7JCL Jose antonio, EA1HWR Rafa and me EA5GVK, and in a moment the Dvswitch of the friend EA1HWR has started to broadcast all the

Help me to make working the application tx and Rx

Ive created the additional .ini files in MB directory: MMDVM_Bridge_TGIF MMDVM_Bridge_BM i then created the .sh files in AB directory: TGIF_chng.sh BM_chng.sh I also edited the file dvsm.macro and add

Hi All, DVSwitch.in which is undated recently was added new "TalkerAlias" line in [DMR] and "Message" line [STAR] section each. The function of the Message in [DSTAR] has no problem because the DSTA

I have reach the stage that EL/ASL node is working perfectly MB< - > Brandmeister TG seems to be perfect (Tested with part from HS and remote HT connected to the BM TG and Parrot works as expected) I

I would like to say this was solved early this morning by using BM HS Security settings pulled from Pi-Star. I was trying to connect to the wrong BM server. I now have HS Security back on and the MMDV

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge. Is it possible to emulate the same idea, but to an FCS reflector? BM_TG <-> MB <-> FCS00457 Here's my attempt