Last edited · 1 revision  

 


Options = StartRef = 4010; RelinkTime = 30; UserLink = 1; CQWW = 1; TS1_1 = 262; TS1_2 = 110; TS1_3 = 1; TS1_4 = 20; TS1_5 = 0; TS2_1 = 2628; TS2_2 = 2627; TS2_3 = 0; TS2_4 = 0; TS2_5 = 0;

- Meaning of the parameters:
-StartRef = 4xxx → Desired StartReflector (4000 → without StartReflector)
-RelinkTime = Time in minutes after which the -StartReflector is reconnected (after a manual reflector change by the user)
-UserLink = Users cannot change reflectors (0)
Users can change reflectors (1)
-CQWW = CQWW function opt-out / subscribe option (0/1)
-TS1_1 = first statically reserved talkgroup in time slot 1
-TS1_2 = second statically reserved talkgroup in time slot 1
-TS1_9 = ninth statically reserved talkgroup in time slot 1
-TS2_1 = first statically reserved talkgroup in time slot 2
-TS2_2 = second statically reserved talkgroup in time slot 2
-TS2_9 = 9th statically reserved talkgroup in time slot 2
Pay attention to the correct syntax and that between each parameter there must be a semicolon (;), also at the end of the line!
If TSx_x = is not used, enter "0": Example: TS2_2 = 0;
You can configure a maximum of 9 static talkgroups in time slot 1, 9 talkgroups in time slot 2, and a start reflector at the same time.