Last edited · 6 revisions  

 


 The example of  DMR to YSFn is the simplest bridge you can build. There are no gateways required. You can use a single instance of MMDVM_Bridge. We will start with setting up MMDVM_Bridge.ini In this document we will include ONLY the stanzas that need to be changed from the default configuration files. Changed fields will be in bold. These are the only values you need to change.

 

MMDVM_Bridge.ini

 

[General]
Callsign=W1AW
Id=1234567
Timeout=180
Duplex=0

 [DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=1

[DMR Network]
Enable=1
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=1
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0

 

 Now we will setup the ports so that DMR can communicate with YSFn This is simply setting the TXPort for YSF to point at the RXPort for DMR. Set the RXPort for YSF to point to the TXPort for DMR.

TXPort -> RXPort

RXPort <- TXPort

The best way to do this is to only change one mode. In the example, We left DMR at the defaults and changed YSF to point to DMR.

 

DVSwitch.ini

 

; Configure the Yaesu Fusion Partner

; Audio format is AMBE 72 bit

; Audio format is IMBE 88 bit

[YSF]

Address = 127.0.0.1      ; Address to send AMBE TLV frames to (export)

TXPort = 31103             ; Port to send AMBE TLV frames to (export)

RXPort = 31100             ; Port to listen on (import)

FallbackID = 1234567   ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 1234           ; Which TG to export 

Slot = 2                          ; Export slot